M. Barakat and M. H. Mahmoud, Recovery of platinum from spent catalyst, Hydrometallurgy, vol.72, issue.3-4, pp.179-18410, 2004.
DOI : 10.1016/S0304-386X(03)00141-5

M. Benson, C. Bennett, J. Harry, M. Patel, and M. Cross, The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems, Resources, Conservation and Recycling, vol.31, issue.1, pp.1-7, 2000.
DOI : 10.1016/S0921-3449(00)00062-8

R. Bhandari, C. Trudewind, and P. Zapp, Life cycle assessment of hydrogen production via electrolysis ??? a review, Journal of Cleaner Production, vol.85, 2013.
DOI : 10.1016/j.jclepro.2013.07.048

L. Duclos, L. Svecova, V. Laforest, G. Mandil, and P. Thivel, Process development and optimization for platinum recovery from PEM fuel cell catalyst, Hydrometallurgy, vol.160, pp.79-89, 2016.
DOI : 10.1016/j.hydromet.2015.12.013
URL : https://hal.archives-ouvertes.fr/emse-01250194

A. A. Fedotov, S. A. Grigoriev, P. Millet, and V. N. Fateev, Plasma-assisted Pt and Pt???Pd nano-particles deposition on carbon carriers for application in PEM electrochemical cells, International Journal of Hydrogen Energy, vol.38, issue.20, pp.8568-8574, 2013.
DOI : 10.1016/j.ijhydene.2012.10.042

D. Garraín, Polymer Electrolyte Membrane Fuel Cells (PEMFC) in Automotive Applications: Environmental Relevance of the Manufacturing Stage, Smart Grid and Renewable Energy, vol.02, issue.02, pp.68-74, 2011.
DOI : 10.4236/sgre.2011.22009

C. Hung, C. Liu, C. Wang, W. Chen, C. Shen et al., Effect of conductive carbon material content and structure in carbon fiber paper made from carbon felt on the performance of a proton exchange membrane fuel cell, Renewable Energy, vol.78, pp.364-373, 2015.
DOI : 10.1016/j.renene.2015.01.021

M. M. Hussain, I. Dincer, and X. Li, A preliminary life cycle assessment of PEM fuel cell powered automobiles, Applied Thermal Engineering, vol.27, issue.13, 2007.
DOI : 10.1016/j.applthermaleng.2007.01.015

D. Iribarren, A. Susmozas, F. Petrakopoulou, and J. Dufour, Environmental and exergetic evaluation of hydrogen production via lignocellulosic biomass gasification, Journal of Cleaner Production, vol.69, pp.165-175, 2014.
DOI : 10.1016/j.jclepro.2014.01.068

B. James and A. Spisak, Mass Production Cost Estimation of Direct H2 PEM Fuel Cell Systems for Transportation Applications, Update. Strateg. Anal. Inc, pp.1-62, 2012.

D. Jones, Membrane materials and technology for low temperature fuel cells Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology. Volume1: Fundamentals and Performance of Low Temperature Fuel Cells, pp.27-55, 2012.

C. Jung, W. Kim, and S. Yi, Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer, International Journal of Hydrogen Energy, vol.37, issue.23, pp.18446-18454, 2012.
DOI : 10.1016/j.ijhydene.2012.09.013

A. Kadous, L. Meddour-boukhobza, M. A. Didi, and D. Villemin, Synthesis and characterization of TOPO and HDADMDPA. Application in uranium (VI) extraction, pp.213-226, 2009.

J. Labbé and J. Dupuy, 2012 platinum group metals market panorama (in french), 2014.

C. Liu, X. Xue, T. Lu, and W. Xing, The preparation of high activity DMFC Pt/C electrocatalysts using a pre-precipitation method, Journal of Power Sources, vol.161, issue.1, pp.68-73, 2006.
DOI : 10.1016/j.jpowsour.2006.03.084

P. Masoni and A. Zamagni, Guidance Document for performing LCAs on Fuel Cells and Hydrogen Technologies Deliverable D3.3 ? Final guidance document, p.30, 2011.

H. S. Oh, J. G. Oh, Y. G. Hong, and H. Kim, Investigation of carbon-supported Pt nanocatalyst preparation by the polyol process for fuel cell applications, Electrochimica Acta, vol.52, issue.25, pp.7278-7285, 2007.
DOI : 10.1016/j.electacta.2007.05.080

T. Oki, T. Katsumata, K. Hashimoto, and M. Kobayashi, Recovery of Platinum Catalyst and Polymer Electrolyte from Used Small Fuel Cells by Particle Separation Technology, MATERIALS TRANSACTIONS, vol.50, issue.7, pp.1864-1870, 2009.
DOI : 10.2320/matertrans.M-M2009812

S. Park, J. Lee, and B. N. Popov, Effect of PTFE content in microporous layer on water management in PEM fuel cells, Journal of Power Sources, vol.177, issue.2, 2008.
DOI : 10.1016/j.jpowsour.2007.11.055

M. Pehnt, Assessing future energy and transport systems: the case of fuel cells, The International Journal of Life Cycle Assessment, vol.8, issue.5, pp.365-378, 2003.
DOI : 10.1007/978-3-322-91826-0

M. Pehnt, Life-cycle assessment of fuel cell stacks, International Journal of Hydrogen Energy, vol.26, issue.1, pp.91-101, 2001.
DOI : 10.1016/S0360-3199(00)00053-7

M. Pehnt, A. Lamm, and H. A. Gasteiger, IS 14040, Life-cycle analysis of fuel cell system components Chapter 94 Life-cycle analysis of fuel cell system components 4, pp.1293-1317, 2003.

L. Shore, Process for recycling components of a PEM fuel cell membrane electrode assembly, pp.261-263, 2006.

A. Simons and C. Bauer, A life-cycle perspective on automotive fuel cells, Applied Energy, vol.157, 2015.
DOI : 10.1016/j.apenergy.2015.02.049

B. Sørensen and D. Roskilde, Total life-cycle assessment of PEM fuel cell car, in: 15th World Hydrogen Energy Conference, pp.1-8, 2004.

G. Stephen and G. Walther, Recycling of used perfluorosulfonic acid membranes, pp.211630-211631, 2005.

S. Towne, V. Viswanathan, J. Holbery, and P. Rieke, Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology, Journal of Power Sources, vol.171, issue.2, 2007.
DOI : 10.1016/j.jpowsour.2007.07.017

N. Veizaga, J. Fernandez, M. Bruno, O. Scelza, and S. De-miguel, Deposition of Pt nanoparticles on different carbonaceous materials by using different preparation methods for PEMFC electrocatalysts, International Journal of Hydrogen Energy, vol.37, issue.23, pp.17910-17920, 2012.
DOI : 10.1016/j.ijhydene.2012.08.144

G. Velayutham, Effect of micro-layer PTFE on the performance of PEM fuel cell electrodes, International Journal of Hydrogen Energy, vol.36, issue.22, 2011.
DOI : 10.1016/j.ijhydene.2011.03.037

Y. Verde, G. Alonso, V. Ramos, H. Zhang, A. J. Jacobson et al., Pt/C obtained from carbon with different treatments and (NH4)2PtCl6 as a Pt precursor, Applied Catalysis A: General, vol.277, issue.1-2, pp.201-207, 2004.
DOI : 10.1016/j.apcata.2004.09.013

W. Wang, S. Chen, J. Li, and W. Wang, Fabrication of catalyst coated membrane with screen printing method in a proton exchange membrane fuel cell, International Journal of Hydrogen Energy, vol.40, issue.13, pp.4649-4658, 2015.
DOI : 10.1016/j.ijhydene.2015.02.027

F. Xu, S. Mu, and M. Pan, Recycling of membrane electrode assembly of PEMFC by acid processing, International Journal of Hydrogen Energy, vol.35, issue.7, 2010.
DOI : 10.1016/j.ijhydene.2009.05.087

J. Zhao, X. He, J. Tian, C. Wan, and C. Jiang, Reclaim/recycle of Pt/C catalysts for PEMFC. Energy Convers, Manag, vol.48, pp.450-453, 2007.

A. Zucaro, G. Fiorentino, A. Zamagni, S. Bargigli, P. Masoni et al., How can life cycle assessment foster environmentally sound fuel cell production and use?, International Journal of Hydrogen Energy, vol.38, issue.1, pp.453-468, 2013.
DOI : 10.1016/j.ijhydene.2012.09.066