D. D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int. Mater. Rev, vol.57, pp.133-164, 2012.

X. Sedao, A. Abou-saleh, A. Rudenko, T. Douillard, C. Esnouf et al., Self-Arranged Periodic Nanovoids by Ultrafast Laser-Induced Near-Field Enhancement, ACS Photonics, vol.5, pp.1418-1426, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01814030

D. Saint-pierre, J. Granier, G. Egaud, E. Baubeau, and C. Mauclair, Fast Uniform Micro Structuring of DLC Surfaces Using Multiple Ultrashort Laser Spots through Spatial Beam Shaping. Phys. Procedia, vol.83, pp.1178-1183, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01415751

Z. Liu, J. Siegel, M. Garcia-lechuga, T. Epicier, Y. Lefkir et al., Three-Dimensional Self-Organization in Nanocomposite Layered Systems by Ultrafast Laser Pulses, ACS Nano, vol.11, pp.5031-5040, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01612817

C. Mauclair, G. Cheng, N. Huot, E. Audouard, A. Rosenfeld et al., Dynamic ultrafast laser spatial tailoring for parallel micromachining of photonic devices in transparent materials, Opt. Express, vol.17, pp.3531-3542, 2009.
URL : https://hal.archives-ouvertes.fr/ujm-00363750

J. Bonse, G. Mann, J. Krüger, M. Marcinkowski, and M. Eberstein, Femtosecond laser-induced removal of silicon nitride layers from doped and textured silicon wafers used in photovoltaics, Thin Solid Films, vol.542, pp.420-425, 2013.

B. Nie, L. Yang, H. Huang, S. Bai, P. Wan et al., Femtosecond laser additive manufacturing of iron and tungsten parts, Appl. Phys. A, vol.119, pp.1075-1080, 2015.

B. Nie, H. Huang, S. Bai, and J. Liu, Femtosecond laser melting and resolidifying of high-temperature powder materials, Appl. Phys. A, vol.118, pp.37-41, 2015.

P. Delaporte and A. Alloncle, Laser-induced forward transfer: A high resolution additive manufacturing technology, Opt. Laser Technol, vol.78, pp.33-41, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01418483

A. Piqué and P. Serra, Laser Printing of Functional Materials: 3D Microfabrication, Electronics and Biomedicine, vol.11, p.2456, 2018.

I. Mingareev, T. Bonhoff, A. F. El-sherif, W. Meiners, I. Kelbassa et al., Femtosecond laser post-processing of metal parts produced by laser additive manufacturing, J. Laser Appl, 2013.

E. Baubeau, F. Missemer, and P. Bertrand, System and Method for Additively Manufacturing by Laser Melting of a Powder Bed, U.S. Patent, vol.15, 2017.

J. Eichstädt and A. J. Huis, Analysis of Irradiation Processes for Laser-Induced Periodic Surface Structures. Phys. Procedia, vol.41, pp.650-660, 2013.

L. V. Zhigilei, Z. Lin, and D. S. Ivanov, Atomistic Modeling of Short Pulse Laser Ablation of Metals: Connections between Melting, Spallation, and Phase Explosion ?, J. Phys. Chem. C, vol.113, pp.11892-11906, 2009.

A. Temmler, M. Küpper, M. A. Walochnik, A. Lanfermann, T. Schmickler et al., Surface structuring by laser remelting of metals, J. Laser Appl, vol.29, p.12015, 2017.

X. Sedao, L. Mathieu, A. Rudenko, A. Pascale-hamri, N. Faure et al., Influence of Pulse Repetition Rate on Morphology and Material Removal Efficiency of Ultrafast Laser Ablated Metallic Surfaces, Opt. Laser Eng

C. A. Zuhlke, T. P. Anderson, and D. R. Alexander, Formation of multiscale surface structures on nickel via above surface growth and below surface growth mechanisms using femtosecond laser pulses, Opt. Express, vol.21, pp.8460-8473, 2013.

S. I. Anisimov and B. S. Luk'yanchuk, Selected problems of laser ablation theory. Phys.-Usp, vol.45, 2002.

J. P. Colombier, P. Combis, E. Audouard, and R. Stoian, Guiding heat in laser ablation of metals on ultrafast timescales: an adaptive modeling approach on aluminum, New J. Phys, vol.14, p.13039, 2012.
URL : https://hal.archives-ouvertes.fr/ujm-00661936

A. N. Volkov and L. V. Zhigilei, Melt dynamics and melt-through time in continuous wave laser heating of metal films: Contributions of the recoil vapor pressure and Marangoni effects, Int. J. Heat Mass Trans, vol.112, pp.300-317, 2017.

F. Bourquard, A. Loir, C. Donnet, and F. Garrelie, In situ diagnostic of the size distribution of nanoparticles generated by ultrashort pulsed laser ablation in vacuum, Appl. Phys. Lett, vol.104, 2014.
URL : https://hal.archives-ouvertes.fr/ujm-00963994

S. Noël, J. Hermann, and T. Itina, Investigation of nanoparticle generation during femtosecond laser ablation of metals, Appl. Surf. Sci, vol.253, pp.6310-6315, 2007.

S. Amoruso, G. Ausanio, R. Bruzzese, M. Vitiello, and X. Wang, Femtosecond laser pulse irradiation of solid targets as a general route to nanoparticle formation in a vacuum, Phys. Rev. B, p.33406, 2005.

M. Guillermin, J. P. Colombier, S. Valette, E. Audouard, F. Garrelie et al., Optical emission and nanoparticle generation in Al plasmas using ultrashort laser pulses temporally optimized by real-time spectroscopic feedback, Phys. Rev. B, p.35430, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00505917

N. Tsakiris, K. K. Anoop, G. Ausanio, M. Gill-comeau, R. Bruzzese et al., Ultrashort laser ablation of bulk copper targets: Dynamics and size distribution of the generated nanoparticles, J. Appl. Phys, vol.115, 2014.

A. Rudenko, C. Mauclair, F. Garrelie, R. Stoian, and J. P. Colombier, Light absorption by surface nanoholes and nanobumps, Appl. Surf. Sci, vol.470, pp.228-233, 2019.
URL : https://hal.archives-ouvertes.fr/ujm-02045229

R. Dufour, G. Perry, M. Harnois, Y. Coffinier, V. Thomy et al., From micro to nano reentrant structures: hysteresis on superomniphobic surfaces, Colloid Polym Sci, vol.291, pp.409-415, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00796451

J. Li, Q. H. Qin, A. Shah, R. H. Ras, X. Tian et al., Oil droplet self-transportation on oleophobic surfaces, Sci. Adv, 2016.